Product ID:NON FLAMING ENAMEL, TPD 24607 WHITE 27880
MSDS Date:03/12/1993
FSC:8010
NIIN:01-344-5100
MSDS Number: BRGPG

CRAWFORD LABS, INC

4165 S EMERALD AVE
CHICAGO, IL 60609
US

Emergency Phone: 312-433-1307

Info Phone: 312-376-7132

Preparer: DAVID SCHMETTERER

Cage: 5V430

CRAWFORD LABORATORIES, INC

CHICAGO, IL 60609 US

Telephone: 312-376-7132

Cage: 5V430

100 SOLVENT (VAPOR PRESSURE 9. MM HG)

CAS: 64742-95-6

Fraction By Weight: 2.8%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

1,2,4-TRIMETHYLBENZENE (SARA III) (VAPOR PRESSURE 1.7 MM

CAS: 95-63-6

RTECS: DC3325000

Fraction By Weight: 2.6%

ACGIH TLV: 25 PPM

TRIMETHYLBENZENES (VAPOR PRESSURE 1.8 MM HG)

CAS: 25551-13-7

RTECS: DC3220000

Fraction By Weight: 2.6%

ACGIH TLV: 25 PPM

MINERAL SPIRITS/66 (VAPOR PRESSURE 3.4 MM HG)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 9.0%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 1.25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

ZINC SULFIDE (RELEASED BY SANDING DRIED PAINT FILM)

CAS: 1314-98-3

Fraction By Weight: 0.45%

PETROLEUM DISTILLATES

Fraction By Weight: 2.2%

ACGIH TLV: 100 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE TOXICITY, RESULTING IN HEADACHE,
DIZZINESS, NAUSEA, UNCONSCIOUSNESS. SEVERE EYE IRRITATION POSSIBLY
RESULTING IN PERMANENT DAMAGE. IRRITATED MUCOUS MEMBRANES. VOMITING
DUE TO INGESTON. DEFATTING AND DRYING OF SKIN, MAY RESULT IN
DERMATITIS & IRRITATION. SENSITIZATION AFTER REPEATED CONTACT.
Explanation of Carcinogenicity:RISK OF CANCER DEPENDS ON DURATION AND
LEVEL OF EXPOSURE.

First Aid:EYE:FLUSH W/WATER 15 MIN,HOLD EYELID OPEN. GET MED
AID.INHAL:REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING
DIFFICULT,ARTIF RESPIRTN IF NOT BREATHING. GET MED AID.KEEP WARM &
COMFORTABLE. NOTHING BY MO UTH TO UNCONSCIOUS. INGEST:CALL DR
IMMED.INDUCE VOMIT ONLY ON DR'S INSTRUCTS.KEEP HEAD BELOW HIPS
(PREVENT ASPIRATN).SKIN:FLUSH W/WATER REMOVING CONTAM CLOTH.WASH
W/SOAP & WATER.IF IRRIT, GET MED AID.

Flash Point Method:TCC
Flash Point:100F,38C
Lower Limits:0.9
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE USED TO KEEP EXPOSED CONTAINERS
COOL, & TO KEEP FLAMMABLE STRUCTURES WET. DO NOT ENTER FIRE AREA
W/O PROPER PROTECTION (HAZARD DECOMP PRESENT).
Unusual Fire/Explosion Hazard:WATER PRESSURE MAY SPREAD A COMBUSTIBLE
LIQUID FIRE. SEALED CONTAINERS MAY EXPLODE IF OVERHEATED.

Spill Release Procedures:WARNING - COMBUSTIBLE. ELIMINATE ALL IGNITION
SOURCES. HANDLING EQUIPMENT MUST BE GROUNDED TO PREVENT SPARKING.
WEARING PROTECTIVE CLOTHING. SOAK UP WITH AN ABSORBENT AND PLACE IN
NON-LEAKING CONTAINE RS. SEAL TIGHTLY FOR PROPER DISPOSAL. EPA
#D001.

Handling and Storage Precautions:HAZARD-COMBUSTBL.STORE IN COOL,DRY
PLACE IN BLDGS FOR COMBUST LIQ.EVALUATE USE IN ELEVATED TEMP
PROCESSES TO ASSURE SAFETY.HOT ORGANIC CHEM VAPOR APT*
Other Precautions:*TO SUDDEN COMBUSTN WHEN MIXED W/AIR.IGNIT TEMPS
DECREASE W/INCREASING VAPOR VOLUME & VAPOR/AIR CONTACT TIME &
INFLUENCED BY PRESSR CHANGES.IGNIT MAY OCCUR AT ELEVATD TEMPS,ESP
WHEN VACUUM IF SUDDEN A IR INGRESS/ESCAPE OF VAPOR TO ATMOSPHERE

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR RESPIRATORS
WHERE VENTILATION IS INADEQUATE.
Ventilation:MUST PROVIDE ADEQUATE VENTILATION.
Protective Gloves:USE RUBBER GLOVES
Eye Protection:WEAR APPROVED SAFETY GOGGLES
Other Protective Equipment:HAVE EYE BATH AND SAFETY SHOWER AVAILABLE.
Work Hygienic Practices:DO NOT REUSE CLOTHING OR SHOES UNTIL CLEANED.
Supplemental Safety and Health

HCC:F4
Boiling Pt:B.P. Text:308 TO 396F
Vapor Density:> AIR
Spec Gravity:1.61
Viscosity:90 KU
Evaporation Rate & Reference:0.1 X N-BUTYL ACETATE
Solubility in Water:SLIGHT
Appearance and Odor:WHITE LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:27.7
Corrosion Rate:NOT CORR

Stability Indicator/Materials to Avoid:YES
MAY BE INCOMPATIBLE WITH STRONG OXIDIZING AGENTS AND STRONG ALKALIES.
Stability Condition to Avoid:AVOID HEAT, SPARKS, OPEN FLAMES, &
INCOMPATIBILITIES. ALSO AIRCRAFT TRANSPORT MUST BE IN ACCORD
W/APPLICABLE REGULATIONS
Hazardous Decomposition Products:INCOMPLETE COMBUSTION FOR PRODUCTS
LIKE THIS MAY FORM HIGHLY POISONOUS CARBON MONOXIDE AND OTHER TOXIC
GASES.
Conditions to Avoid Polymerization:AVOID HEAT, SPARKS, OPEN FLAMES, &
INCOMPATIBILITIES.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH CURRENT
LOCAL, STATE AND FEDERAL REGULATION. CONTACT AN APPROVED DISPOSAL
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.